Evaluation of Intellectual Property Objects in the Nanoindustry Field

Russian Microelectronics - The recently developed nanomaterials and their production technologies as intellectual property objects (IPOs) are considered. The role of the informational-analytical...     

The Influence of the Sequence of Application of Modifying Components on the Protective Properties of a Chemical Ammonia Absorber

Protection of Metals and Physical Chemistry of Surfaces - In this work, a universal sorbent has been obtained that works according to the mechanisms of chemisorption and adsorption by impregnating...     

Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

Experimental Study of Oilfield Water Plugging with Organic Chromium Gel

Chemistry and Technology of Fuels and Oils - Application of water flooding technologies in the oilfield causes intensive heterogeneity of the oil reservoir and improper circulation of the injected...     

Thermal Stability of the Structure and Microhardness of the Al–0.05 vol % Al2O3 Nanocomposite Fabricated by Accumulative Roll Bonding

Russian Journal of Non-Ferrous Metals - The evolution of the microstructure and microhardness of the Al–0.05 vol % nAl2O3 nanocomposite (where nAl2O3 are aluminum nanoparticles) and aluminum...     

Damping Steels for Sheet Stacker Components During Sheet Rolling

Metallurgist - Steels alloyed with chromium are used for the first time for manufacturing sheet stacker components. Steel with a high chromium content (45X), exhibiting good damping properties,...     

Characterization of Aluminum Foam Impact Response

Strength of Materials - The paper addresses the investigation of high-strain rate compressive behavior of Al foams subjected to impact at the intermediate striking velocity ranged from 40 to...     

Processing Metallic Bismuth to Produce Citrate

Theoretical Foundations of Chemical Engineering - Using chemical and XRD phase analysis, along with electron microscopy, the hydrolytic processing of metallic bismuth into high-purity citrate has...     

Hardening of Rods by High-Frequency Current

Russian Engineering Research - Improvement in the wear resistance of plunger-pump rods is considered. Hardening by high-frequency current is proposed.     

Demercaptanization of Light Hydrocarbon Fractions with Strong Aqueous Ammonia without Producing Sulfur Caustic Wastewater

Theoretical Foundations of Chemical Engineering - A technology for the demercaptanization of light hydrocarbon fractions and liquefied petroleum gas with 25% aqueous ammonia is proposed. One...